rpigear.com

Part#
RPI-TMP-1.1

-- Temperature Logger Board
-- NTC thermistors(Pack of 4)
-- Mounting Hardware(standoffs x 4, M2.5 screw x 8)
Note: Raspberry Pi is not included.

Part#
NTC-10K-3950-WP-1M

-- NTC thermistors(Pack of 4)

Part#
K-THRM-1M

-- K Type Thermocouples(Pack of 2)

Part#
RPI-UPS-2.0

-- UPS board
-- Mounting Hardware(8 x screws, 4 x fem/fem standoffs)
Note: Raspberry Pi and batteries not included.

Part#
RPI_POE_1.0

-- Raspberry Pi POE Module
-- Mounting Hardware(fem/fem standoffs x 4, M2.5 screw x 8)
Note: Fan and Raspberry Pi not included.

Part#
POE_FAN_1.0

-- 25mm x 25mm Sunon MagLev 5V fan with stuck rotor detection
-- Mounting Hardware
--Heatsink for Raspberry Pi CPU

Part#
RPI-SLR-1.2

-- Solar Power Module for Raspberry Pi
-- Mounting Hardware(fem/fem standoffs x 4, M2.5 screw x 8)
-- quick connect crimp terminals(4 pieces)
Note: Solar Panel, Battery, and Raspberry Pi are not included.

Part#
RPI-WU-1.2

• 2 x Wireless UART Boards
• Mounting Hardware
  Note: Antennas and Raspberry Pi are not included.

 Price :
Out Of Stock

Part#
RPI-FAN-1.0

--Fan Controller Board
--Mounting Hardware(fem/fem standoffs x 4, M2.5 screw x 8)
--Heatsink for Raspberry Pi CPU
Note: Raspberry Pi is not included.

Part#
LCD-3.3V-20x4-BLK/YEL-0

-- 20x4 Black/Yellow Character LCD
-- 6 fem/fem jumper wires

Part#
LCD-3.3V-20x4-WHT/BLUE-1

-- 20x4 White/Blue Character LCD
-- 6 fem/fem jumper wires

Part#
LCD-3.3V-20x4-BLK/WHT-2

-- 20x4 Black/White Character LCD
-- 6 fem/fem jumper wires

Part#
LCD-3.3V-20x4-WHT/BLK-3

-- 20x4 White/Black Character LCD
-- 6 fem/fem jumper wires

Part#
RPI-STK-KIT-1

-- 4 x male/female extra tall m2.5 standoffs
-- 20x2 male female stacking connector
-- M2.5 screws(4 pieces)
Note:
This kit is not needed to connect just one rpigear board to the Raspberry Pi. It's only needed to stack multiple boards on top of each other. For example a Raspberry Pi at the bottom, then a UPS in the middle, then a temperature readout board at the top.